Parts and Code

So the parts we needed 3d printed and laser cut have been designed and sent in to be manufactured.
Below are the dropbox links to both pieces.

1. https://www.dropbox.com/s/42pbx4b0yeig5r0/3d%20printed%20part%20for%20Bridge%20Ghani.SLDPRT?dl=0

The 3D printed part will be a cylinder that attaches to the motor that will spin a string attached to the bridge to raise and lower it.



2.
https://www.dropbox.com/s/7mhdfilld1p3wot/Laser%20Cut%20Part%20for%20Bridge%20Logo%20Ghani.SLDPRT?dl=0

The laser cut part serves no special purpose but is more for school pride as it displays the UML logo and also fulfills the project requirement. It will be mounted right on the bridge with glue.

After these are created the simple assembly of the bridge and these pieces coupled with code should do the trick!

Below is also a link to the code
https://www.dropbox.com/s/zc7x3cax5ytjss9/Bridge_Code.ino?dl=0